Graco Inc. GC-1402F User Manual

OperationFormula-X Chop GC-1402FENGImportant Safety InstructionsRead all warnings and instructions in this manual. Save these instructions.Low emissi

10 GC-1402EREVISION C 23750-03 Formula X Chop Dispense GunAssembly Drawings189018

11GC-1402EREVISION CPart NumberDescription Qty.10773-28C SCREW 113867-05 O-RING 113867-07 O-RING 315845-01 5/32in. BALL DRIVER 118383-02 1/4in. DIA. S

12 GC-1402E To relieve uid and air pressures: 1. Push down Yellow slide valve, P/N 21402-00 to bleed off air to system.

13GC-1402EParts Replacement ProcedureFormula X Chop GunBefore performing maintenance on the dispense gun, follow Pressure Relief Procedure.Due t

14 GC-1402E4. Place PTFE washers, p/n: 23721-04 on top and bottom of uid valve, p/n: 23743-00.1. Ensure bores are clean before building mate

15GC-1402EDispense Tip Reference ChartPartNumberOrice 23047-J1 .012 J2 .014 J3 .022 M1 .012

16 GC-1402EDispense Tip Reference ChartPartNumberOriceLPA2-147-1525 0.015 1540 0.015 1550 0.015 1565

17GC-1402EPartNumberOrice Min.Width (in.)Max.Width (in.)Min.Output (lbs.)MaxOutput (lbs.)23005- C4 0.040 7 16.5 5.4 10.02 C5 0.0

18 GC-1402ETechnical DataCategory DataMaximum Fluid Working Pressure 2000 psi (14 MPa, 138 bar)Maximum Air Inlet Pressure 100 psi (0.7 MPa, 7 bar)Typi

19GC-1402ENotes

2 GC-1402EContentsWarnings ... 3Important Safety Information ... 5Groundi

Graco Ohio Standard WarrantyGraco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free fr

3GC-1402EWarnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point

4 GC-1402E WARNINGSKIN INJECTION HAZARD High-pressure uid from gun, hose leaks, or ruptured components will pierce skin. This may look like just a

5GC-1402EImportant Safety Information Methyl Ethyl Ketone Peroxide (MEKP) MEKP is among the more hazardous materials found in commerc

6 GC-1402E This equipment needs to be grounded. Ground the dispense gun through connection to a GlasCraft approved grounded uid sup

7GC-1402E Hose Attachment 1. Push in and rotate the trigger lock to stop the trigger from being activated. 2. Attach the (black

8 GC-1402ERepair KitsPartNumberDescription23792-00 GUN AIR KIT23793-00 GUN SEAL KIT23732-00 GUN FLUID VALVE KITStandard EquipmentPartNumberDescription

9GC-1402EREVISION C 23750-03 Formula X Chop Dispense GunAssembly Drawings